31490 1.INSTALL CLUTCH ACCUMULATOR ASSEMBLY
Install the clutch accumulator assembly with the 2 bolts.
| *a | Torque Wrench Fulcrum Length |
Using a union nut wrench, connect the 2 flexible hose tubes.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf)
2.FILL RESERVOIR WITH BRAKE FLUID
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
3.BLEED CLUTCH LINE
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
4.CHECK BRAKE FLUID LEVEL IN RESERVOIR
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
5.CHECK FOR CLUTCH FLUID LEAK