Home › Drivetrain › CLUTCH › CLUTCH ACCUMULATOR (for 1VD-FTV)
RM25T0E _52 Drivetrain _029901 CLUTCH _0136572 CLUTCH ACCUMULATOR(for 1VD-FTV) A

CLUTCH  CLUTCH ACCUMULATOR(for 1VD-FTV)  INSTALLATION  


PROCEDURE

Hide 31490 1.INSTALL CLUTCH ACCUMULATOR ASSEMBLY

a.
C163033

Install the clutch accumulator assembly with the 3 nuts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


b.
C310614C01
1.594,2.49 1.906,2.688 0.313,0.198 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect the 2 flexible tubes.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf)




Hide 2.FILL BRAKE FLUID RESERVOIR

Hide 3.BLEED CLUTCH LINE

Hide 4.CHECK FLUID LEVEL IN RESERVOIR

Hide 5.CHECK FOR CLUTCH FLUID LEAK