1.REMOVE MANUAL TRANSMISSION ASSEMBLY
31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
Remove the clutch release fork sub-assembly with the clutch release bearing assembly from manual transmission assembly.
Remove the clutch release bearing assembly and release bearing hub clip from the clutch release fork sub-assembly.
31237 3.REMOVE CLUTCH RELEASE FORK SUPPORT BOOT
Remove the clutch release fork support boot from the clutch release fork sub-assembly.
31236B 4.REMOVE RELEASE FORK SUPPORT
Remove the release fork support from the manual transmission assembly.
31210 5.REMOVE CLUTCH COVER ASSEMBLY
| *a | Matchmark |
Put matchmarks on the clutch cover assembly and flywheel sub-assembly.
Loosen each set bolt one turn at a time until spring tension is released.
Remove the set bolts, and pull off the clutch cover assembly.
Do not drop the clutch disc.
31250 6.REMOVE CLUTCH DISC ASSEMBLY
Keep the lining part of the clutch disc assembly, pressure plate and surface of the flywheel away from oil and foreign matter.
33311W 7.INSPECT INPUT SHAFT BEARING