88280A 1.INSPECT CLUTCH SWITCH ASSEMBLY
| *a | Component without harness connected (Clutch Switch Assembly) |
| *b | ON:6.5 to 7.5 mm (0.2560 to 0.2952 in.) |
| *c | OFF:1.5 to 2.5 mm (0.0591 to 0.0984 in.) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 - 2 | ON (Pushed) | Below 1 Ω |
| 1 - 2 | OFF (Released) | 10 kΩ or higher |
If the result is not as specified, replace the clutch switch assembly.