Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL OIL
RM25T0E _52 Drivetrain _029907 AXLE AND DIFFERENTIAL _0136703 DIFFERENTIAL OIL A

AXLE AND DIFFERENTIAL  DIFFERENTIAL OIL  REPLACEMENT  


PROCEDURE

Hide 1.DRAIN DIFFERENTIAL OIL

a.

Stop the vehicle on a level place.


b.

Remove the filler plug and gasket.


c.

Remove the drain plug and gasket, and drain the differential oil.


d.

Install a new gasket and the drain plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 2.ADD DIFFERENTIAL OIL

a.
D025304C14
0.677,1.354 0.854,1.542 0.177,0.188 10 false *a
*a 0 to 5 mm (0 to 0.196 in.)


Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

NOTICE:
·

Too much or too little oil will lead to differential problems.

·

After changing the oil, drive the vehicle and check the oil level again.



Oil Type and Viscosity:
Item Type
w/o LSD Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent
w/ LSD Toyota Genuine Differential gear oil LX 75W-85 GL-5 or equivalent


Rear Differential Capacity:
Item Capacity
for Standard 2.35 to 2.45 liters (2.49 to 2.58 US qts, 2.07 to 2.15 Imp. qts)
w/ LSD
w/ Differential Lock 2.25 to 2.35 liters (2.38 to 2.48 US qts, 1.98 to 2.06 Imp. qts)


Front Differential Capacity:
Item Capacity
for Standard 2.8 to 2.9 liters (2.96 to 3.06 US qts, 2.47 to 2.55 Imp. qts)
w/ Differential Lock



b.

Install a new gasket and the filler plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)