Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM25T0E _58 Vehicle Interior _029930 SEAT _0136805 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:

If the seat is set down in another location after removing it from the vehicle, the seat may tilt and damage the front inner seat track assembly RH or front outer seat track assembly RH due to the difference in shape between the left and right seat tracks.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71910A 1.REMOVE FRONT SEAT HEADREST ASSEMBLY

a.

Remove the front seat headrest assembly.


Hide 73150 2.REMOVE FRONT CENTER SEAT LAP TYPE BELT ASSEMBLY

Hide 73230 3.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

Hide 72137B 4.REMOVE SEAT TRACK COVER RH (w/ Seat Track Cover)

a.

Operate the seat track adjusting handle to move the seat to the foremost position.


b.
B375300

Remove the clip.


c.

Detach the 2 guides and remove the seat track cover RH.


Hide 72157A 5.REMOVE INNER SEAT TRACK BRACKET COVER RH (w/ Seat Track Cover)

HINT:

Use the same procedure described for the seat track cover RH.


Hide 6.REMOVE FRONT SEAT ASSEMBLY

a.
B374277

Remove the 2 bolts.


b.

Operate the seat track adjusting handle to move the seat to the rearmost position.


c.
B374278

Remove the 2 bolts.


d.

Operate the seat track adjusting handle to move the seat to the center position and operate the reclining adjusting handle to move the seatback to the upright position.


e.

Remove the front seat assembly from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.