Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD
45130 2.REMOVE STEERING PAD
45100 3.REMOVE STEERING WHEEL ASSEMBLY
| *a | Matchmark |
Remove the steering wheel set nut.
Place matchmarks on the steering wheel assembly and main shaft.
| *a | Hold |
| *b | Turn |
Using SST, remove the steering wheel assembly.
84259 4.REMOVE STEERING PAD COVER LH
Remove the screw and 3 guide pins, remove the steering pad cover LH.
84258 5.REMOVE STEERING PAD COVER RH
Use the same procedure described for the LH side.
45184 6.REMOVE LOWER STEERING WHEEL BOSS COVER
Remove the 2 screws.
Detach the 4 claws to remove the lower steering wheel boss cover.