Home › Engine / Hybrid System › 1HZ (STARTING) › STARTER (for 2.5 kW, 4.5 kW Type) › 2014.08–2022.09
RM25T0E _51 Engine / Hybrid System _029899 1HZ STARTING _0136996 STARTER(for 2.5 kW, 4.5 kW Type) A

1HZ STARTING  STARTER(for 2.5 kW, 4.5 kW Type)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 28100 3.REMOVE STARTER ASSEMBLY

a.
A326091

Remove the nut.


b.
A326090

Open the terminal cap.


c.

Remove the nut and disconnect the starter wire.


d.

Disconnect the starter connector.


e.

Remove the bolt and starter assembly, and disconnect the ground cable.