Home › Engine / Hybrid System › 1HZ (STARTING) › RELAY
RM25T0E _51 Engine / Hybrid System _029899 1HZ STARTING _0136998 RELAY G

1HZ STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY (ST)

a.
A296121N02
2.354,0.792 2.615,0.531 true 2.667,1.115 3.031,1.115 true 2.365,1.427 2.146,1.688 true 1.635,1.104 2,1.104 true 0.302,0.792 0.458,0.99 0.156,0.198 10 3 0.313,1.333 0.469,1.531 0.156,0.198 10 2 1.292,1.313 1.448,1.51 0.156,0.198 10 1 1.302,0.792 1.458,0.99 0.156,0.198 10 5 2.625,0.375 2.781,0.573 0.156,0.198 10 1 3.094,1.042 3.25,1.24 0.156,0.198 10 5 2.083,1.719 2.24,1.917 0.156,0.198 10 2 1.51,1.021 1.667,1.219 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.


Hide 28610A 2.INSPECT GLOW PLUG RELAY (GLOW)

a.
A296121N03
2.354,0.792 2.615,0.531 true 2.667,1.115 3.031,1.115 true 2.365,1.427 2.146,1.688 true 1.635,1.104 2,1.104 true 0.302,0.792 0.458,0.99 0.156,0.198 10 3 0.313,1.333 0.469,1.531 0.156,0.198 10 2 1.292,1.313 1.448,1.51 0.156,0.198 10 1 1.302,0.792 1.458,0.99 0.156,0.198 10 5 2.625,0.375 2.781,0.573 0.156,0.198 10 1 3.094,1.042 3.25,1.24 0.156,0.198 10 5 2.083,1.719 2.24,1.917 0.156,0.198 10 2 1.51,1.021 1.667,1.219 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the glow plug relay.