Home › Engine / Hybrid System › 1VD-FTV (STARTING) › GLOW PLUG › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029900 1VD-FTV STARTING _0137001 GLOW PLUG A

1VD-FTV STARTING  GLOW PLUG  REMOVAL  


PROCEDURE

Hide 19871 2.REMOVE NO. 1 GLOW PLUG CONNECTOR

a.

Remove the 2 glow plug screw grommets and 2 nuts, and disconnect the 2 wire harnesses.


b.
A269587C01
0.083,0.125 0.271,0.292 0.188,0.167 10 false *A 0.083,2.427 0.354,2.615 0.271,0.188 10 true *B
*A Bank 1
*B Bank 2


Remove the 8 glow plug screw grommets, 8 nuts and 2 No. 1 glow plug connectors.


Hide 19850 3.REMOVE GLOW PLUG ASSEMBLY

a.
A269588C01
0.083,0.125 0.271,0.292 0.188,0.167 10 false *A 0.083,2.385 0.385,2.625 0.302,0.24 10 true *B
*A Bank 1
*B Bank 2


Using a 10 mm deep socket wrench, remove the 8 glow plug assemblies.

HINT:

Before removing the glow plugs assembly, thoroughly clean off all dirt, sand, etc.