Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Rear) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0137468 FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Rear) G

1HZ FUEL  FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Rear)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A211816C01
0.99,2.333 0.344,2.333 false 1.823,4.302 1.188,4.302 false 0.115,0.146 0.323,0.313 0.208,0.167 10 false *a 0.198,2.25 0.333,2.396 0.135,0.146 10 false F 1.042,4.219 1.177,4.365 0.135,0.146 10 false E
*a Component without harness connected
(Fuel Sender Gauge Assembly)


Check the fuel sender gauge resistance.

i.

Check that the float moves smoothly between F (upper end) and E (lower end).


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 F (Upper End) 12 to 18 Ω
2 - 3 E (Lower End) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.