Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK
RM25T0E _58 Vehicle Interior _029924 DOOR LOCK _0137597 FRONT DOOR LOCK G

DOOR LOCK  FRONT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69320 1.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Wireless Door Lock System, w/ Rear Door, for Driver Side)

a.
B388281C01
2.094,3.719 2.656,3.719 true 1.813,3.635 2.229,3.219 true 1.385,3.719 0.917,3.719 true 2.01,1.594 2.323,1.75 0.313,0.156 10 false *a 2.188,2.01 2.5,2.167 0.313,0.156 10 false *b 2.094,2.521 2.406,2.677 0.313,0.156 10 false *c 0.844,3.073 1.156,3.229 0.313,0.156 10 false *d 2.74,3.615 2.896,3.813 0.156,0.198 10 false L 2.302,3.104 2.458,3.302 0.156,0.198 10 false E 0.719,3.646 1.031,3.844 0.313,0.198 10 false UL
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly LH)


Inspect the door lock motor.

i.

Remove the front door lock assembly LH.


ii.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 5
Battery negative (-) → Terminal 4
Lock
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 5
Unlock


If the result is not as specified, replace the front door lock assembly LH.



b.

Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (L) - 2 (E) Lock Below 1 Ω
1 (L) - 2 (E) Off 10 kΩ or higher
3 (UL) - 2 (E)
3 (UL) - 2 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



Hide 69310 2.INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Wireless Door Lock System, w/ Rear Door, for Driver Side)

a.
B388282C02
2.271,3.646 2.75,3.646 true 1.99,3.583 2.406,3.167 true 1.542,3.656 0.958,3.656 true 1.104,1.552 1.417,1.708 0.313,0.156 10 false *a 0.958,1.979 1.271,2.135 0.313,0.156 10 false *b 1.042,2.479 1.354,2.635 0.313,0.156 10 false *c 0.917,2.99 1.229,3.146 0.313,0.156 10 false *d 0.74,3.573 1.052,3.771 0.313,0.198 10 false UL 2.469,3.01 2.625,3.208 0.156,0.198 10 false E 2.802,3.563 2.958,3.76 0.156,0.198 10 false L
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly RH)


Inspect the door lock motor.

i.

Remove the front door lock assembly RH.


ii.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 5
Battery negative (-) → Terminal 4
Lock
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 5
Unlock


If the result is not as specified, replace the front door lock assembly RH.



b.

Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (L) - 2 (E) Lock Below 1 Ω
1 (L) - 2 (E) Off 10 kΩ or higher
3 (UL) - 2 (E)
3 (UL) - 2 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



Hide 69320 3.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Wireless Door Lock System, w/o Rear Door, for Driver Side)

a.
B388285C01
1.771,3.667 2.302,3.448 true 1.375,3.677 0.833,3.406 true 1.5,3.99 0.875,4.25 true 1.146,1.375 1.458,1.531 0.313,0.156 10 false *a 1.115,1.708 1.427,1.865 0.313,0.156 10 false *b 1.188,2.031 1.5,2.188 0.313,0.156 10 false *c 1.021,2.927 1.333,3.083 0.313,0.156 10 false *d 0.615,3.333 0.927,3.531 0.313,0.198 10 false UL 0.729,4.188 0.885,4.385 0.156,0.198 10 false E 2.385,3.375 2.542,3.573 0.156,0.198 10 false L
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly LH)


Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (L) - 3 (E) Lock Below 1 Ω
1 (L) - 3 (E) Off 10 kΩ or higher
2 (UL) - 3 (E)
2 (UL) - 3 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



Hide 69310 4.INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Wireless Door Lock System, w/o Rear Door, for Driver Side)

a.
B388286C01
1.917,3.667 2.448,3.396 true 1.5,3.688 0.948,3.427 true 1.615,3.969 0.917,4.26 true 2.01,1.396 2.323,1.552 0.313,0.156 10 false *a 2.052,1.74 2.365,1.896 0.313,0.156 10 false *b 1.99,2.073 2.302,2.229 0.313,0.156 10 false *c 1,2.854 1.313,3.01 0.313,0.156 10 false *d 2.542,3.281 2.698,3.479 0.156,0.198 10 false L 0.719,3.333 1.031,3.531 0.313,0.198 10 false UL 0.75,4.208 0.906,4.406 0.156,0.198 10 false E
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly RH)


Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (L) - 3 (E) Lock Below 1 Ω
1 (L) - 3 (E) Off 10 kΩ or higher
2 (UL) - 3 (E)
2 (UL) - 3 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



Hide 69320 5.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Wireless Door Lock System, w/ Rear Door, for Driver Side)

a.
B388287C01
2.323,3.833 2.854,3.625 true 2.042,3.896 2.74,4.177 true 1.625,3.885 1.042,4.219 true 1.354,3.531 0.958,3.344 true 1.74,3.521 2.198,2.906 true 2.042,3.552 2.49,3.135 true 2.323,3.573 2.813,3.313 true 2.135,1.521 2.448,1.677 0.313,0.156 10 false *a 2.281,1.927 2.594,2.083 0.313,0.156 10 false *b 2.146,2.448 2.458,2.604 0.313,0.156 10 false *c 1.104,2.99 1.417,3.146 0.313,0.156 10 false *d 0.823,4.167 1.135,4.365 0.313,0.198 10 false UL 2.802,4.135 2.958,4.333 0.156,0.198 10 false E 2.917,3.552 3.073,3.75 0.156,0.198 10 false L 0.521,3.26 1.135,3.458 0.615,0.198 10 false LSSR 2.271,2.771 2.583,2.969 0.313,0.198 10 false UL 2.542,3.031 2.698,3.229 0.156,0.198 10 false L 2.906,3.188 3.063,3.385 0.156,0.198 10 false E
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly LH)


Inspect the door lock motor.

i.

Remove the Front Door Lock Assembly LH.


ii.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (L)
Battery negative (-) → Terminal 3 (UL)
Lock
Battery positive (+) → Terminal 3 (UL)
Battery negative (-) → Terminal 2 (L)
Unlock


If the result is not as specified, replace the front door lock assembly LH.



b.

Inspect the position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (E) - 4 (LSSR) Lock 10 kΩ or higher
Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



c.

Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 (L) - 6 (E) Lock Below 1 Ω
5 (L) - 6 (E) Off 10 kΩ or higher
6 (E) - 7 (UL)
6 (E) - 7 (UL) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



Hide 69310 6.INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Wireless Door Lock System, w/ Rear Door, for Driver Side)

a.
B388288C01
2.219,3.896 2.708,3.667 true 1.927,3.938 2.667,4.25 true 1.5,3.969 0.948,4.219 true 1.229,3.615 0.813,3.49 true 1.656,3.583 2.135,3.031 true 1.938,3.615 2.448,3.156 true 2.229,3.594 2.729,3.333 true 1.292,1.573 1.604,1.729 0.313,0.156 10 false *a 1.156,2.021 1.469,2.177 0.313,0.156 10 false *b 1.208,2.51 1.521,2.667 0.313,0.156 10 false *c 1.031,3.083 1.344,3.24 0.313,0.156 10 false *d 0.75,4.146 1.063,4.344 0.313,0.198 10 false UL 2.76,3.552 2.917,3.75 0.156,0.198 10 false L 2.771,4.229 2.927,4.427 0.156,0.198 10 false E 0.406,3.406 1.021,3.604 0.615,0.198 10 false LSSR 2.198,2.885 2.51,3.083 0.313,0.198 10 false UL 2.51,3.052 2.667,3.25 0.156,0.198 10 false L 2.781,3.24 2.938,3.438 0.156,0.198 10 false E
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly RH)


Inspect the door lock motor.

i.

Remove the Front Door Lock Assembly RH.


ii.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (L)
Battery negative (-) → Terminal 3 (UL)
Lock
Battery positive (+) → Terminal 3 (UL)
Battery negative (-) → Terminal 2 (L)
Unlock


If the result is not as specified, replace the front door lock assembly RH.



b.

Inspect the position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (E) - 4 (LSSR) Lock 10 kΩ or higher
Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



c.

Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 (L) - 6 (E) Lock Below 1 Ω
5 (L) - 6 (E) Off 10 kΩ or higher
6 (E) - 7 (UL)
6 (E) - 7 (UL) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



Hide 69320 7.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Wireless Door Lock System, w/o Rear Door, for Driver Side)

a.
B388285C02
1.74,3.667 2.156,3.25 true 1.354,3.646 0.885,3.375 true 1.479,4 0.958,4.219 true 1.177,1.344 1.49,1.5 0.313,0.156 10 false *a 1.104,1.698 1.417,1.854 0.313,0.156 10 false *b 1.167,2.021 1.479,2.177 0.313,0.156 10 false *c 0.906,2.948 1.219,3.104 0.313,0.156 10 false *d 2.25,3.135 2.406,3.333 0.156,0.198 10 false L 0.656,3.26 0.969,3.458 0.313,0.198 10 false UL 0.781,4.135 0.948,4.365 0.167,0.229 10 false E
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly LH)


Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (L) - 3 (E) Lock Below 1 Ω
1 (L) - 3 (E) Off 10 kΩ or higher
2 (UL) - 3 (E)
2 (UL) - 3 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



Hide 69310 8.INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Wireless Door Lock System, w/o Rear Door, for Driver Side)

a.
B388286C02
1.927,3.625 2.385,3.313 true 1.51,3.656 1.031,3.458 true 1.635,3.948 1.063,4.24 true 1.958,1.385 2.271,1.542 0.313,0.156 10 false *a 2.063,1.729 2.375,1.885 0.313,0.156 10 false *b 1.958,2.083 2.271,2.24 0.313,0.156 10 false *c 1.021,2.906 1.333,3.063 0.313,0.156 10 false *d 2.469,3.208 2.625,3.406 0.156,0.198 10 false L 0.792,3.375 1.104,3.573 0.313,0.198 10 false UL 0.938,4.177 1.094,4.375 0.156,0.198 10 false E
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly RH)


Inspect the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (L) - 3 (E) Lock Below 1 Ω
1 (L) - 3 (E) Off 10 kΩ or higher
2 (UL) - 3 (E)
2 (UL) - 3 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



Hide 69320 9.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Rear Door, for Front Passenger Side)

a.
B388289C01
0.969,1.406 1.281,1.563 0.313,0.156 10 false *a 0.875,1.938 1.188,2.094 0.313,0.156 10 false *b 0.958,2.458 1.271,2.615 0.313,0.156 10 false *c 1.219,2.958 1.531,3.115 0.313,0.156 10 false *d
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly LH)


Remove the front door lock assembly LH.


b.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Lock
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Unlock


If the result is not as specified, replace the front door lock assembly LH.


Hide 69310 10.INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Rear Door, for Front Passenger Side)

a.
B388290C01
2.25,1.458 2.563,1.615 0.313,0.156 10 false *a 2.385,1.979 2.698,2.135 0.313,0.156 10 false *b 2.25,2.552 2.563,2.708 0.313,0.156 10 false *c 1.01,3.063 1.323,3.219 0.313,0.156 10 false *d
*a Lock
*b Off
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly RH)


Remove the front door lock assembly RH.


b.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Lock
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Unlock


If the result is not as specified, replace the front door lock assembly RH.


Hide 69120A 11.INSPECT FRONT DOOR LOCK ACTUATOR ASSEMBLY LH (for Driver Side)

a.
B388314C01
0.521,0.813 0.833,0.969 0.313,0.156 10 false *a 0.531,1.25 0.844,1.406 0.313,0.156 10 false *b 1.083,2.302 1.396,2.458 0.313,0.156 10 false *c
*a Lock
*b Unlock
*c Component without harness connected
(Front Door Lock Actuator Assembly LH)


Inspect the door lock actuator.

i.

Remove the front door lock actuator assembly LH.


ii.

Apply battery voltage and check the operation of the door lock actuator.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 2
Lock
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 4
Unlock


If the result is not as specified, replace the front door lock actuator assembly LH.



b.

Inspect the position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Lock 10 kΩ or higher
Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



Hide 69110 12.INSPECT FRONT DOOR LOCK ACTUATOR ASSEMBLY RH (for Driver Side)

a.
B388313C01
2.813,0.823 3.125,0.979 0.313,0.156 10 false *a 2.792,1.26 3.104,1.417 0.313,0.156 10 false *b 1.094,2.313 1.406,2.469 0.313,0.156 10 false *c
*a Lock
*b Unlock
*c Component without harness connected
(Front Door Lock Actuator Assembly RH)


Inspect the door lock actuator.

i.

Remove the front door lock actuator assembly RH.


ii.

Apply battery voltage and check the operation of the door lock actuator.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 2
Lock
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 4
Unlock


If the result is not as specified, replace the front door lock actuator assembly RH.



b.

Inspect the position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Lock 10 kΩ or higher
Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



Hide 69120A 13.INSPECT FRONT DOOR LOCK ACTUATOR ASSEMBLY LH (for Front Passenger Side)

a.
B388312C01
0.542,0.792 0.854,0.948 0.313,0.156 10 false *a 0.563,1.229 0.875,1.385 0.313,0.156 10 false *b 1.031,2.292 1.344,2.448 0.313,0.156 10 false *c
*a Lock
*b Unlock
*c Component without harness connected
(Front Door Lock Actuator Assembly LH)


Inspect the door lock actuator.

i.

Remove the front door lock actuator assembly LH.


ii.

Apply battery voltage and check the operation of the door lock actuator.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Lock
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Unlock


If the result is not as specified, replace the front door lock actuator assembly LH.



Hide 69110 14.INSPECT FRONT DOOR LOCK ACTUATOR ASSEMBLY RH (for Front Passenger Side)

a.
B388283C02
2.792,0.833 3.104,0.99 0.313,0.156 10 false *a 2.813,1.26 3.125,1.417 0.313,0.156 10 false *b 1.083,2.26 1.396,2.417 0.313,0.156 10 false *c
*a Lock
*b Unlock
*c Component without harness connected
(Front Door Lock Actuator Assembly RH)


Inspect the door lock actuator.

i.

Remove the front door lock actuator assembly RH.


ii.

Apply battery voltage and check the operation of the door lock actuator.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Lock
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Unlock


If the result is not as specified, replace the front door lock actuator assembly RH.