Wear protective gloves. Sharp areas on the parts may injure your hands.
If the seat is set down in another location after removing it from the vehicle, the seat may tilt and damage the outer rear seat lower front track bracket or rear seatback lock cover due to the difference in shape between the left and right seat tracks.
71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the 2 rear seat headrest assemblies.
72123B 2.REMOVE FRONT OUTER SEAT TRACK BRACKET COVER
Detach the claw and 2 guides and remove the front outer seat track bracket cover.
Use the same procedure to remove the front outer seat track bracket cover on the other side.
72138A 3.REMOVE REAR SEAT TRACK COVER LH
Pull the reclining adjuster release handle and fold down the seatback.
Pull the lever in the direction indicated by the arrow in the illustration to release the 2 locks.
Fold down the rear No. 1 seat assembly.
Detach the 3 claws and remove the rear seat track bracket cover LH.
72137D 4.REMOVE REAR SEAT TRACK COVER RH
Detach the 4 claws and remove the rear seat track bracket cover RH.
5.REMOVE REAR NO. 1 SEAT ASSEMBLY
Remove the 2 bolts.
Retune the rear No. 1 seat assembly.
Remove the 2 bolts and remove the rear No. 1 seat assembly.
2 or more people are required when carrying the rear No. 1 seat assembly out of the vehicle.
Be careful not to damage the vehicle body.