Wear protective gloves. Sharp areas on the seat frame may injure your hands.
If the seat is set down in another location after removing it from the vehicle, the seat may tilt and damage the outer rear seat lower front track bracket or rear seatback lock cover due to the difference in shape between the left and right seat tracks.
72524 1.REMOVE RECLINING ADJUSTER RELEASE HANDLE
Remove the reclining adjuster release handle as shown in the illustration.
Use the same procedure to remove the reclining adjuster release handle on the other side.
71834A 2.REMOVE REAR NO. 1 SEAT RECLINING COVER LH
Remove the screw.
Detach the claw and remove the rear No. 1 seat reclining cover LH.
71833A 3.REMOVE REAR NO. 1 SEAT RECLINING COVER RH
Use the same procedure described for the LH side.
4.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Remove the 4 bolts and bench type rear seat cushion assembly.
72604 5.REMOVE REAR SEATBACK LOCK SUB-ASSEMBLY LH
Remove the 2 bolts.
Detach the guide and remove the rear seatback lock sub-assembly LH.
72603 6.REMOVE REAR SEATBACK LOCK SUB-ASSEMBLY RH
Use the same procedure described for LH side.
78950 7.REMOVE NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY
| *1 | Hook |
| *2 | Fastener |
Detach the 2 hooks and open the 2 fasteners.
Remove the screw and No. 1 fold seat stopper band assembly.
71931A 8.REMOVE REAR SEAT HEADREST SUPPORT
Detach the 8 claws and remove the 4 rear seat headrest supports.
71077B 9.REMOVE BENCH TYPE REAR SEATBACK COVER
Remove the 6 hog rings.
Remove the bench type rear seatback cover from the rear No. 1 seatback pad.
71651 10.REMOVE REAR NO. 1 SEATBACK PAD
Remove the rear No. 1 seatback pad from the rear seatback frame sub-assembly.
72501C 11.REMOVE RECLINING CONNECTING PIPE SUB-ASSEMBLY
Remove the reclining connecting pipe sub-assembly from the rear seatback frame sub-assembly.
71336A 12.REMOVE REAR SEAT CUSHION LINK STAY LH
| *1 | E-ring |
| *2 | Washer |
Using a screwdriver, remove the 2 E-rings.
Tape the screwdriver tip before use.
Remove the rear seat cushion link stay LH and 4 washers.
71335C 13.REMOVE REAR SEAT CUSHION LINK STAY RH
Use the same procedure described for the LH side.
72182 14.REMOVE OUTER REAR SEAT LOWER FRONT TRACK BRACKET LH
| *1 | Protective Tape |
Using a screwdriver, push and hold the seat cushion spring to release the tension on the outer rear seat lower front track bracket LH, and then using a screwdriver, remove the E-ring, lower rear seat hinge LH and outer rear seat lower front track bracket LH.
Tape the screwdriver tip before use.
Release the screwdriver and remove the seat cushion spring.
When replacing the spring nut and guide roller:
Remove the spring nut and guide roller from the seat cushion spring.
72181 15.REMOVE OUTER REAR SEAT LOWER FRONT TRACK BRACKET RH
Using a screwdriver, remove the E-ring, lower rear seat hinge RH and outer rear seat lower front track bracket RH.
Tape the screwdriver tip before use.
72594 16.REMOVE REMOTE CONTROL LEVER KNOB LH
Remove the screw and remote control lever knob LH.
72593A 17.REMOVE REMOTE CONTROL LEVER KNOB RH
Use the same procedure described for the LH side.
72598 18.REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH
Remove the screw.
Detach the claw and remove the reclining remote control lever bezel LH.
72597A 19.REMOVE RECLINING REMOTE CONTROL LEVER BEZEL RH
Use the same procedure described for the LH side.
71324A 20.REMOVE REAR SEAT CUSHION
for Semi-long Body:
Remove the 2 screws and 2 rear seat cushions.
for Double Cab:
Remove the 4 screws and 4 rear seat cushions.
21.REMOVE BENCH TYPE REAR SEAT CUSHION COVER WITH PAD
Detach the 9 pieces of fastening tape and open the fastening tape on the backside of the bench type rear seat cushion cover.
Remove the 28 hog rings.
Remove the 3 hog rings and rear seat cushion carpet.
Use the same procedure to remove the 3 hog rings and rear seat cushion carpet.
Remove the 4 hog rings and bench type rear seat cushion cover with pad from the rear seat cushion frame sub-assembly.
71075B 22.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
Remove the 24 hog rings and bench type rear seat cushion cover from the rear seat cushion pad.
72666 23.REMOVE REAR SEATBACK LOCK COVER LH
Remove the screw and rear seatback lock cover LH.
72665 24.REMOVE REAR SEATBACK LOCK COVER RH
Use the same procedure described for the LH side.
78920 25.REMOVE NO. 2 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY
Loosen the left and right lock part nuts.
| *1 | Cable Tie | *2 | Nut |
| *3 | Cable End | - | - |
Detach the 4 clamps.
Cut the 4 cable ties.
Disconnect the 4 cable ends and remove the No. 2 fold seat lock control cable assembly.
72660F 26.REMOVE REAR SEAT LOCK ASSEMBLY LH
Remove the bolt, washer, bush, seat inner belt sub-assembly, rear seat 3 point type belt assembly LH, collar, and rear seat lock assembly LH from the rear seat cushion frame sub-assembly.
72650F 27.REMOVE REAR SEAT LOCK ASSEMBLY RH
Remove the bolt, washer, bush, rear seat outer belt sub-assembly, rear 3 point type belt assembly RH, collar, and rear seat lock assembly RH from the rear seat cushion frame sub-assembly.
28.REMOVE CLIP
Detach the 2 claws and remove the 2 clips.