84810 1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
w/o Double Inside Handles:
Check the switch function.
| *a | Up |
| *b | Down |
| *c | Component without harness connected (Power Window Regulator Switch Assembly) |
Measure the resistance when the switch is operated according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 4 - 3 | UP | Below 1 Ω |
| 5 - 1 | ||
| 1 - 2 | OFF | Below 1 Ω |
| 4 - 3 | ||
| 4 - 5 | DOWN | Below 1 Ω |
| 1 - 2 |
If the result is not as specified, replace the power window regulator switch assembly.
w/ Double Inside Handles:
Check the switch function.
| *a | Up |
| *b | Down |
| *c | Component without harness connected (Power Window Regulator Switch Assembly) |
Measure the resistance when the switch is operated according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (B) - 3 (U) | UP | Below 1 Ω |
| 4 (SD) - 5 (D) | ||
| 1 (SU) - 3 (U) | OFF | Below 1 Ω |
| 4 (SD) - 5 (D) | ||
| 1 (SD) - 3 (U) | DOWN | Below 1 Ω |
| 2 (B) - 5 (D) |
If the result is not as specified, replace the power window regulator switch assembly.