84810 1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
| *a | UP |
| *b | DOWN |
| *c | Component without harness connected (Power Window Regulator Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 4 - 3 | UP | Below 1 Ω |
| 5 - 1 | ||
| 1 - 2 | OFF | Below 1 Ω |
| 4 - 3 | ||
| 4 - 5 | DOWN | Below 1 Ω |
| 1 - 2 |
If the result is not as specified, replace the power window regulator switch assembly.