Home › Vehicle Exterior › WINDOW / GLASS › BACK DOOR GLASS(for RH Side)
RM25T0E _59 Vehicle Exterior _029935 WINDOW / GLASS _0137673 BACK DOOR GLASS(for RH Side) A

WINDOW / GLASS  BACK DOOR GLASS(for RH Side)  INSTALLATION  


PROCEDURE

Hide 68131 1.CLEAN BACK DOOR GLASS

a.
E268586

Clean the outer edge of the back door glass with non-residue solvent.

NOTICE:
·

Do not touch the back door glass surface after cleaning it.

·

Be careful not to damage the glass.

·

Even if using a new back door glass, clean the back door glass with non-residue solvent.




Hide 68291D 2.INSTALL BACK DOOR GLASS WEATHERSTRIP RH

a.
B380568C01
2.76,1.219 3.135,1.76 3.135,1.76 2.771,1.052 false 3.052,1.813 3.365,2.01 0.313,0.198 10 false *1
*1 Working Cord


Install the back door glass weatherstrip RH to the back door glass RH.


b.

Apply a working cord along the back door glass weatherstrip RH groove, as shown in the illustration.


Hide 68131C 3.INSTALL BACK DOOR GLASS RH

a.
B380537C01
1.49,1.385 1.969,1.385 false 0.729,0.927 1.208,0.927 false 2.01,1.313 2.323,1.469 0.313,0.156 10 false *1 0.552,0.854 0.865,1.01 0.313,0.156 10 false *2
*1 Primer M
*2 Adhesive


Apply primer to the back door glass weatherstrip on the surface with body as shown in the illustration.

NOTICE:
·

Do not apply too much primer.

·

Let the primer coating dry for 3 minutes or more.




b.
B380576

Install the back door glass RH by pulling the cord from the room side, while pushing back door glass windshield RH from the outside with your open hand.


c.
B380577

Tap from the outside with your open hand.


Hide 62720A 4.CHECK FOR LEAKS AND REPAIR

a.

Conduct a leak test after the adhesive has completely hardened.


b.

Seal any leaks with auto glass sealer.