Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
62252A 1.INSTALL SIDE WINDOW WEATHERSTRIP LH (for Fixed Type, for Front Side)
Install the side window weatherstrip LH.
62742 2.INSTALL QUARTER WINDOW WEATHERSTRIP LH (for Fixed Type, for Rear Side)
Install the quarter window weatherstrip LH.
62211F 3.INSTALL SIDE WINDOW REAR GLASS LH (for Fixed Type, for Front Side)
Install the side window rear glass LH.
62712 4.INSTALL QUARTER WINDOW GLASS LH (for Fixed Type, for Rear Side)
Install the quarter window glass LH.
5.INSTALL QUARTER WINDOW GLASS ASSEMBLY LH (for Front Side)
| *1 | Clip |
| *a | R End |
Install the quarter window glass assembly LH.
Install the 4 clips to the vehicle body at the locations shown in the illustration.
| Area | Specified Condition |
|---|---|
| a | 150.0 mm (5.9055 in.) |
6.INSTALL QUARTER WINDOW GLASS ASSEMBLY LH (for Rear Side)
| *1 | Clip |
| *a | R End |
Install the quarter window glass assembly LH.
Install the 4 clips to the vehicle body at the locations shown in the illustration.
| Area | Specified Condition |
|---|---|
| a | 150.0 mm (5.9055 in.) |
62375D 7.INSTALL NO. 1 SIDE WINDOW CLIP (for Front Side)
Install the No. 1 side window clip.
62775B 8.INSTALL QUARTER WINDOW CLIP LH (for Rear Side)
Install the quarter window clip LH.