1.DRAIN MANUAL TRANSMISSION OIL
Stop the vehicle on a level surface.
Remove the manual transmission case plug and gasket.
Remove the drain plug sub-assembly and gasket to drain the manual transmission oil.
Install a new gasket and the drain plug sub-assembly.
2.ADD MANUAL TRANSMISSION OIL
| *a | 0 to 5 mm (0 to 0.196 in.) |
Add manual transmission oil until the oil level is within 0 to 5 mm (0 to 0.196 in.) from the bottom of the manual transmission case plug opening.
| Oil grade | Oil viscosity | Standard capacity |
|---|---|---|
| GL-4 | SAE 75W-90 | 2.9 liters (3.1 US qts, 2.6 Imp. qts) |
Install a new gasket and the manual transmission case plug.