Home › Vehicle Interior › HEATING / AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR
RM25T0E _58 Vehicle Interior _029469 HEATING / AIR CONDITIONING _0137763 AMBIENT TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  AMBIENT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88790F 1.INSPECT THERMISTOR ASSEMBLY (AMBIENT TEMPERATURE SENSOR)

a.
E302736C01
2.927,0.813 2.76,0.333 2.76,0.333 2.406,0.333 false 0.271,0.354 0.583,0.51 0.313,0.156 10 false *a 2.24,0.25 2.552,0.406 0.313,0.156 10 false *b 0.146,1.667 0.458,1.823 0.313,0.156 10 false *c 1.719,4.469 2.031,4.625 0.313,0.156 10 false *d
*a Component without harness connected
(Thermistor Assembly (Ambient Temperature Sensor))
*b Sensing Portion
*c Resistance (kΩ)
*d Temperature (°C (°F))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensor may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the result is not as specified, replace the thermistor assembly (ambient temperature sensor).