55412D 1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL
55413D 2.REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
81942 3.REMOVE HEATER CONTROL NAME SHEET
| *A | w/ Heater |
| *B | w/ Cooler System |
w/o Heater:
Remove the 2 control knob sub-assemblies.
w/ Heater:
Remove the 3 control knob sub-assemblies.
w/o Cooler System:
Remove the heater blower switch knob.
w/ Cooler System:
Remove the heater blower switch knob and cooler switch knob.
Detach the 6 claws and remove the heater control name sheet.
55910 4.REMOVE HEATER OR BOOST VENTILATOR CONTROL ASSEMBLY
Remove the 4 bolts.
| *A | w/ Rear Heater |
w/o Rear Heater:
Disconnect the 2 connectors.
w/ Rear Heater:
Disconnect the 3 connectors.
| *A | w/ Heater |
| *1 | Air Inlet Damper Control Cable Sub-assembly (Black) |
| *2 | Defroster Damper Control Cable Sub-assembly (Black) |
| *3 | Water Valve Control Cable Sub-assembly (Blue) |
| *4 | Airmix Damper Control Cable Sub-assembly (Black) |
w/o Heater:
Detach the 4 claws and remove the 2 heater control cable clamps.
w/ Heater:
Detach the 6 claws and remove the 3 heater control cable clamps.
w/o Heater:
Remove the air inlet damper control cable sub-assembly and defroster damper control cable sub-assembly.
w/ Heater:
Remove the air inlet damper control cable sub-assembly, defroster damper control cable sub-assembly and water valve control cable sub-assembly.
Detach the 2 claws and remove the airmix damper control cable sub-assembly.
Remove the heater or boost ventilator control assembly.
84732A 5.REMOVE REAR HEATER BLOWER SWITCH (w/ Rear Heater)
84730 6.REMOVE HEATER BLOWER SWITCH ASSEMBLY
Remove the nut, washer and heater blower switch assembly.