Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (for Step Type)
RM25T0E _59 Vehicle Exterior _029942 EXTERIOR PANELS / TRIM _0137741 FRONT BUMPER(for Step Type) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Step Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 82132 1.INSTALL NO. 2 COWL WIRE (w/ Fog Light)

a.

Attach the 9 clamps to install the No. 2 cowl wire.


Hide 75111 2.INSTALL FRONT LICENSE PLATE BRACKET (w/o Winch)

a.

Install the front license plate bracket with the 2 screws.


Hide 52711A 3.INSTALL FRONT BUMPER GARNISH (w/ Garnish)

a.

Install the front bumper garnish with the 8 clips.


Hide 38649 4.INSTALL WINCH CONTROL WIRE (w/ Winch)

a.

Install the winch control wire with the 2 nuts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


b.

Connect the fall prevention hook.


c.

Attach the 4 claws to install the front bumper winch cover sub-assembly.


Hide 75111 5.INSTALL FRONT LICENSE PLATE BRACKET (w/ Winch)

a.

Install the front license plate bracket with the 2 nuts.


Hide 81220 6.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 7.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedures described for the LH side.


Hide 52128B 8.INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)

a.

Attach the 2 claws to install the front bumper hole cover LH.


Hide 52127D 9.INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:

Use the same procedures described for the LH side.


Hide 52113 10.INSTALL FRONT BUMPER BAR LH (w/ Over Fender)

a.
B171185

Install the front bumper bar LH with the 4 clips.


b.

Install the front No. 3 bumper bracket plate.


Hide 52112 11.INSTALL FRONT BUMPER BAR RH (w/ Over Fender)

HINT:

Use the same procedures described for the LH side.