Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (for Standard)
RM25T0E _59 Vehicle Exterior _029942 EXTERIOR PANELS / TRIM _0137740 FRONT BUMPER(for Standard) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Standard)  DISASSEMBLY  


PROCEDURE

Hide 52113 1.REMOVE FRONT BUMPER BAR LH (w/ Over Fender)

a.
B167392

Remove the front No. 3 bumper bracket plate.


b.
B167393

Remove the 4 clips and front bumper bar LH from the front bumper cover.


Hide 52112 2.REMOVE FRONT BUMPER BAR RH (w/ Over Fender)

HINT:

Use the same procedures described for the LH side.


Hide 52128B 3.REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)

a.
B167377

Detach the 2 claws and remove the front bumper hole cover LH.


Hide 52127D 4.REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:

Use the same procedures described for the LH side.


Hide 81220 5.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 6.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedures described for the LH side.


Hide 52711A 7.REMOVE FRONT BUMPER GARNISH (w/ Garnish)

a.
B167379

Remove the 8 clips and front bumper garnish.


Hide 75111 8.REMOVE FRONT LICENSE PLATE BRACKET

a.
B167378

Remove the 2 screws and front license plate bracket.


Hide 82132 9.REMOVE NO. 2 COWL WIRE (w/ Fog Light)

a.

Detach the 9 clamps and remove the No. 2 cowl wire.

B388376