75303A 1.REMOVE HOOD EMBLEM SUB-ASSEMBLY
Remove the nut.
| *1 | Bush |
Detach the clip and remove the hood emblem sub-assembly.
Remove the bush.
75441B 2.REMOVE BACK DOOR NAME PLATE
When removing the back door name plate, heat the vehicle body and back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or back door name plate excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
| *3 | Boss |
Put protective tape around the back door name plate.
Insert a piano wire between the vehicle body and back door name plate.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the back door name plate.
75463 3.REMOVE REAR NO. 4 NAME PLATE
When removing the rear No. 4 name plate, heat the vehicle body and rear No. 4 name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear No. 4 Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or rear No. 4 name plate excessively.
Put protective tape around the rear No. 4 name plate.
Insert a piano wire between the vehicle body and rear No. 4 name plate.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the rear No. 4 name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the rear No. 4 name plate.
| *A | except Model Code #J79 Series | *B | for Model Code #J79 Series |
| *C | w/o Auxiliary Tank | *D | w/ Auxiliary Tank |
| *1 | Protective Tape | *2 | Wooden Block |
75465 4.REMOVE REAR NO. 5 NAME PLATE
When removing the rear No. 5 name plate, heat the vehicle body and rear No. 5 name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear No. 5 Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or rear No. 5 name plate excessively.
| *1 | Protective Tape |
Put protective tape around the rear No. 5 name plate.
Heat the vehicle body surface and rear No. 5 name plate using a heat light.
Pull back an edge of the rear No. 5 name plate and pull it parallel to the vehicle body to remove it.
75471B 5.REMOVE REAR BODY NO. 1 NAME PLATE
When removing the rear body No. 1 name plate, heat the vehicle body and rear body No. 1 name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Body No. 1 Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or rear body No. 1 name plate excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
Put protective tape around the rear body No. 1 name plate.
Insert a piano wire between the vehicle body and rear body No. 1 name plate.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the rear body No. 1 name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the rear body No. 1 name plate.
75445A 6.REMOVE NO. 5 BACK DOOR NAME PLATE
When removing the No. 5 back door name plate, heat the vehicle body and No. 5 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 5 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 5 back door name plate excessively.
Put protective tape around the No. 5 back door name plate.
Insert a piano wire between the vehicle body and No. 5 back door name plate.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 5 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 5 back door name plate.
| *A | except Model Code #J79 Series, w/o Auxiliary Tank | *B | for Model Code #J79 Series |
| *1 | Protective Tape | *2 | Wooden Block |
75365 7.REMOVE FRONT FENDER EMBLEM
| *1 | Protective Tape |
| *2 | Moulding Remover |
Put protective tape around the front fender emblem.
Using a moulding remover, detach the 4 clips and remove the front fender emblem.