Use the same procedures for the RH and LH sides.
The procedures listed below are for the LH side.
76604 1.REMOVE FRONT FENDER MUDGUARD SUB-ASSEMBLY LH
for Pickup:
Remove the 3 screws and front fender mudguard sub-assembly LH.
except pickup:
Remove the 3 screws and front fender mudguard sub-assembly LH.
w/ Over Fender:
Using a T30 "TORX" socket wrench, remove the 2 screws.
Remove the bolt and nut.
Remove the front fender mudguard sub-assembly LH, as shown in the illustration.