Use the same procedures for the RH and LH sides.
The procedures listed below are for the LH side.
51078B 1.INSTALL NO. 3 SIDE STEP BRACKET SUB-ASSEMBLY LH
Install the 2 No. 3 side step bracket sub-assembly LH with the 4 bolts.
51077B 2.INSTALL NO. 6 SIDE STEP BRACKET SUB-ASSEMBLY LH
Install the 3 No. 6 side step bracket sub-assembly LH with the 6 bolts.
51793B 3.INSTALL SIDE STEP BRACKET LH
Install the side step bracket LH with the 4 bolts.
51759A 4.INSTALL REAR SIDE DOOR STEP PLATE COVER LH
Install the plate cover with the 2 bolts.
51774A 5.INSTALL FRONT SIDE DOOR STEP PLATE COVER LH (w/o Over Fender)
Install the front side door step plate cover LH with the 2 bolts.
Install 4 new rivets.
Using an air riveter or hand riveter with a nose piece, install the plate with 2 new rivets.
If the rivet cannot be cut, pull it once and cut it.
| *1 | Riveter |
| *2 | Mandrel |
| *a | INCORRECT |
| *b | CORRECT |
Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
Confirm that the rivets are seated properly against the plate.
Do not tilt the riveter when installing the rivet to the plate.
Do not leave any space between the rivet head and plate.
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
Do not leave any space between the plate and step plate. Firmly hold together the 2 items while installing the rivet.
51774A 6.INSTALL FRONT SIDE DOOR STEP PLATE COVER LH (w/ Over Fender)
Install the plate cover with the screw and nut.