38110 1.INSTALL WINCH ASSEMBLY
Using a crane or equivalent, install the winch assembly to the vehicle.
Be careful as the winch assembly is very heavy.
Be sure to perform the operation with 2 persons or more.
Be careful not to damage the winch assembly.
38649 2.INSTALL WINCH CONTROL WIRE
Connect the connector.
Attach the clamp.
Install the winch control wire with the 2 nuts.
52130 3.INSTALL FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY
| *1 | Cable |
| *2 | Wire |
|
Bolt |
|
Connector |
|
Nut |
Connect the connector.
Install the wire with the nut.
Install the cable with the 2 bolts.
|
Bolt A |
|
Bolt B |
|
Nut |
|
Bolt C |
Install the front bumper side mounting bracket assembly with the 2 bolts labeled C and 2 nuts.
Install the 2 bolts labeled A and 2 bolts labeled B.
52119A 4.INSTALL FRONT BUMPER COVER
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL