1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
52119A 2.REMOVE FRONT BUMPER COVER
38649 3.REMOVE WINCH CONTROL WIRE
Remove the 2 nuts.
Disconnect the connector.
Detach the clamp and remove the wire.
52130 4.REMOVE FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY
|
Bolt A |
|
Bolt B |
|
Nut |
|
Bolt C |
Remove the 2 bolts labeled A and 2 bolts labeled B.
Remove the 2 nuts, 2 bolts labeled C and front bumper side mounting bracket assembly.
38110 5.REMOVE WINCH ASSEMBLY
| *1 | Cable |
| *2 | Wire |
|
Bolt |
|
Connector |
|
Nut |
Remove the 2 bolts and cable.
Disconnect the connector.
Remove the nut and disconnect the wire.
Using a crane or equivalent, remove the winch assembly from the vehicle.
Be careful as the winch assembly is very heavy.
Be sure to perform the operation with 2 persons or more.
Be careful not to damage the winch assembly.