67006A 1.ADJUST BACK DOOR PANEL SUB-ASSEMBLY LH
Remove the hole plug.
Remove the rear speaker cover.
Remove the rear speaker grille.
Remove the rear speaker assembly.
Remove the speaker box.
Remove the back door inside handle assembly.
Click hereVehicle Exterior>DOOR / HATCH>BACK DOOR(for LH Side)>DISASSEMBLY
Remove the back door trim panel assembly LH.
Click hereVehicle Exterior>DOOR / HATCH>BACK DOOR(for LH Side)>DISASSEMBLY
Remove the back door service hole cover LH.
Click hereVehicle Exterior>DOOR / HATCH>BACK DOOR(for LH Side)>DISASSEMBLY
Loosen the body's hinge bolts and adjust the door's position.
Tighten the body's hinge bolts after the adjustment.
Loosen the door's hinge bolts and adjust the door's position.
Tighten the body's hinge bolts after the adjustment.
69410C 2.ADJUST BACK DOOR LOCK STRIKER PLATE ASSEMBLY
Using a T40 "TORX" socket wrench, adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a brass bar and hammer.