67005D 1.ADJUST BACK DOOR PANEL SUB-ASSEMBLY RH
Remove the hole plug.
Remove the rear speaker grille.
Remove the rear speaker cover.
Remove the rear speaker assembly.
Remove the speaker box.
Remove the back door trim panel assembly RH.
Click hereVehicle Exterior>DOOR / HATCH>BACK DOOR(for RH Side)>DISASSEMBLY
Remove the back door service hole cover RH.
Click hereVehicle Exterior>DOOR / HATCH>BACK DOOR(for RH Side)>DISASSEMBLY
Loosen the body's hinge bolts and adjust the door's position.
Tighten the body's hinge bolts after the adjustment.
Loosen the door's hinge bolts and adjust the door's position.
Tighten the body's hinge bolts after the adjustment.
69470C 2.ADJUST BACK DOOR UPPER LOCK STRIKER ASSEMBLY
Check that the fit and door lock linkages are adjusted correctly.
Adjust the striker position by slightly loosening the striker mounting bolts or screws, and hitting the striker with a brass bar and hammer.
Tighten the striker mounting bolts or screws again.
69430A 3.ADJUST BACK DOOR LOCK STRIKER ASSEMBLY
Check that the fit and door lock linkages are adjusted correctly.
Adjust the striker position by slightly loosening the striker mounting bolts or screws, and hitting the striker with a brass bar and hammer.
Tighten the striker mounting bolts or screws again.