Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 1HZ)
RM25T0E _58 Vehicle Interior _029469 HEATING / AIR CONDITIONING _0137761 COMPRESSOR(for 1HZ) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1HZ)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E192926C01
0.031,0.073 0.344,0.229 0.313,0.156 10 false *A 0.052,2.427 0.365,2.583 0.313,0.156 10 false *B
*A for Type A
*B for Type B


a.

Detach the clamp.


b.

Remove the screw and the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

E192928C01
1.146,1.552 1.573,1.552 false 0.99,1.479 1.302,1.635 0.313,0.156 10 false *1
*1 SST


a.

Clamp the compressor assembly with magnet clutch in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.