Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1VD-FTV)
RM25T0E _58 Vehicle Interior _029469 HEATING / AIR CONDITIONING _0137769 COMPRESSOR(for 1VD-FTV) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1VD-FTV)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E192925

a.

Detach the clamp.


b.

Remove the screw and the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

E192927C01
0.844,1.531 1.25,1.531 false 0.698,1.458 1.01,1.615 0.313,0.156 10 false *1
*1 SST


a.

Clamp the compressor assembly with magnet clutch in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00260  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.