Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER (for 1HZ RHD)
RM25T0E _58 Vehicle Interior _029469 HEATING / AIR CONDITIONING _0137864 CONDENSER(for 1HZ RHD) A

HEATING / AIR CONDITIONING  CONDENSER(for 1HZ RHD)  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 53111 2.REMOVE RADIATOR GRILLE

Hide 16400 4.REMOVE RADIATOR ASSEMBLY

Hide 86510 5.REMOVE HIGH PITCHED HORN ASSEMBLY

Hide 86520 6.REMOVE LOW PITCHED HORN ASSEMBLY

Hide 53217A 7.REMOVE HOOD LOCK SUPPORT BRACE

E303641

a.

Remove the 2 bolts and hood lock support brace.


Hide 53510 8.REMOVE HOOD LOCK ASSEMBLY

E303840

a.

Remove the 2 bolts and hood lock assembly.


Hide 53205 9.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

E191726

a.

Remove the 6 bolts.


b.

Detach the 3 clamps and remove the upper radiator support sub-assembly.


Hide 88711 10.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

E303651

a.

Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

NOTICE:
·

When removing the bolt, do not allow any tools to contact the pipe.

·

When removing the bolt, hold a part of the pipe near the connector.




b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88712 11.DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE

E303652

a.

Remove the nut and No. 1 cooler refrigerant suction hose from the cooler condenser assembly.

NOTICE:
·

When removing the nut, do not allow any tools to contact the pipe.

·

When removing the nut, hold a part of the pipe near the connector.




b.

Remove the O-ring from the No. 1 cooler refrigerant suction hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88717 12.DISCONNECT NO.1 COOLER REFRIGERANT SUCTION PIPE

E303653

a.

Remove the nut and disconnect the No. 1 cooler refrigerant suction pipe from the cooler condenser assembly.

NOTICE:
·

When removing the nut, do not allow any tools to contact the pipe.

·

When removing the nut, hold a part of the pipe near the connector.




b.

Remove the O-ring from the No. 1 cooler refrigerant suction pipe.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88716B 13.DISCONNECT COOLER REFRIGERANT LIQUID PIPE B

E303654

a.

Remove the nut and disconnect the cooler refrigerant liquid pipe B from the cooler condenser assembly.

NOTICE:
·

When removing the nut, do not allow any tools to contact the pipe.

·

When removing the nut, hold a part of the pipe near the connector.




b.

Remove the O-ring from the cooler refrigerant liquid pipe B.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88460 14.REMOVE COOLER CONDENSER ASSEMBLY

a.
E303655

Remove the 2 bolts.


b.

Remove the cooler condenser assembly as shown in the illustration.