88568B 1.REMOVE AIR FILTER
Detach the 2 claws and remove the air filter.
87103B 2.REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
Remove the 3 screws and blower with fan motor sub-assembly.
88515 3.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
Remove the packing, cooler expansion valve and 2 O-rings from the No. 1 cooler evaporator sub-assembly.
88501 4.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
| *a | Cut |
Cut the packing where the upper cooling case and lower cooling case meet.
Remove the 10 screws and detach the clamp.
| *1 | No. 1 Cooler Thermistor Wire Harness | - | - |
Remove the upper cooling case.
Remove the air filter.
Remove the No. 1 cooler evaporator sub-assembly from the lower cooling case.
88625 5.REMOVE NO. 1 COOLER THERMISTOR
Remove the No. 1 cooler thermistor.
87138C 6.REMOVE BLOWER RESISTOR
Remove the 2 screws and blower resistor.
88539 7.REMOVE NO. 1 COOLER UNIT DRAIN HOSE
Remove the hose clip.
Remove the No. 1 cooler unit drain hose.