Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
88650 1.INSTALL COOLER STABILIZER AMPLIFIER ASSEMBLY
Install the amplifier with the nut.
Connect the connector.
55452A 2.INSTALL NO. 2 INSTRUMENT PANEL BOX
55409F 3.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY