Use the same procedure for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
85914A 1.INSTALL ANTENNA MOTOR CONTROL RELAY
Install the antenna motor control relay with the 2 bolts.
Connect the connector.
86300 2.INSTALL ANTENNA ASSEMBLY (for Manual Type Antenna)
Pass the antenna assembly through the engine room hole and install the antenna assembly to the engine room side as shown in the illustration.
Install the nut.
Install the grommet and attach the antenna assembly to the clamp.
Connect the connector.
86300 3.INSTALL ANTENNA ASSEMBLY (for Auto Type Antenna)
Pass the antenna assembly through the engine room hole and install the antenna assembly to the engine room side as shown in the illustration.
Install the nut.
Connect the connector.
Install the grommet and attach the antenna assembly to the clamp.
Connect the connector.
55550 4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Passenger Side)
55480D 5.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for Driver Side)
86392 6.INSTALL ANTENNA ORNAMENT
Install the antenna ornament as shown in the illustration.
86396 7.INSTALL ANTENNA NUT
Install the antenna nut as shown in the illustration.
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL