Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR(for LH Side)
RM25T0E _59 Vehicle Exterior _029937 DOOR / HATCH _0137856 BACK DOOR(for LH Side) G

DOOR / HATCH  BACK DOOR(for LH Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 67006A 1.INSPECT BACK DOOR PANEL SUB-ASSEMBLY LH

a.

Check that the clearance measurements of areas A to G are within the standard range.

B385051N01
4.333,1.469 4.542,1.708 0.208,0.24 10 false A 4.01,1.677 4.167,1.875 0.156,0.198 10 false B 1.323,2.802 1.479,3 0.156,0.198 10 false C 1.094,3.833 1.25,4.031 0.156,0.198 10 false D 1.5,4.052 1.656,4.25 0.156,0.198 10 false E 4.073,4.927 4.229,5.125 0.156,0.198 10 false F 4.427,4.583 4.583,4.781 0.156,0.198 10 false G

Standard Clearance:
Area Specified Condition Area Specified Condition
A -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) B 5.0 to 9.0 mm (0.197 to 0.354 in.)
C 5.0 to 9.0 mm (0.197 to 0.354 in.) D -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
E 4.8 to 7.8 mm (0.189 to 0.307 in.) F 4.5 to 7.5 mm (0.177 to 0.295 in.)
G -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) - -