84222D 1.INSPECT NO. 4 TRANSFER INDICATOR SWITCH
| *a | Component without harness connected (No. 4 Transfer Indicator Switch) |
| *b | Pushed |
| *c | Released |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (+B) - 1 (GND) | Pushed | Below 1 Ω |
| Released | 100 kΩ or higher |
If the result is not as specified, replace the No. 4 transfer indicator switch.