84725 1.INSPECT CENTER DIFFERENTIAL LOCK SWITCH
| *a | Component without harness connected (Center Differential Lock Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (IG) - 2 (RF) | OFF | 10 kΩ or higher |
| 1 (IG) - 4 (R) | 10 kΩ or higher | |
| 1 (IG) - 2 (RF) | RR | 10 kΩ or higher |
| 1 (IG) - 4 (R) | Below 1 Ω | |
| 1 (IG) - 2 (RF) | FR-RR | Below 1 Ω |
| 1 (IG) - 4 (R) | Below 1 Ω |
If the result is not as specified, replace the center differential lock switch.