Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM25T0E _52 Drivetrain _029907 AXLE AND DIFFERENTIAL _0138022 REAR AXLE SHAFT G

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 42312 1.INSPECT REAR AXLE SHAFT LH

a.
C305708

Inspect the rear axle shaft runout.

Maximum runout:

0.8 mm (0.031 in.)


HINT:

If the rear axle shaft or flange is damaged or worn, or if the runout is more than the maximum, replace the rear axle shaft.