Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE FRONT WHEEL
48520 2.REMOVE FRONT SHOCK ABSORBER ASSEMBLY LH
| *a | Wooden or Rubber Block |
Support the front axle housing assembly with a jack.
Place a wooden or rubber block between the jack and arm.
Hold the piston rod and remove the nut.
Remove the front No. 2 shock absorber cushion retainer and front No. 1 shock absorber cushion retainer.
Hold the front shock absorber assembly LH and remove the nut.
Remove the front shock absorber assembly LH and front No. 2 shock absorber cushion retainer.
Remove the 2 front No. 2 shock absorber cushion retainers and front No. 1 shock absorber cushion retainer from the front shock absorber assembly LH.