Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE REAR WHEEL
48540 2.REMOVE REAR SHOCK ABSORBER ASSEMBLY LH
Support the rear axle housing assembly with a jack.
Remove the upper mounting bolt, rear No. 1 shock absorber cushion washer and 2 bushing and disconnect the rear shock absorber assembly LH from the frame.
Remove the lower mounting bolt, rear No. 1 shock absorber cushion washer and 2 bushing and remove the rear shock absorber assembly LH from the spring U bolt seat sub-assembly LH.