Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM25T0E _53 Suspension _029910 REAR SUSPENSION _0138029 REAR SHOCK ABSORBER A

REAR SUSPENSION  REAR SHOCK ABSORBER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48540 1.TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH

a.
C305880

Temporarily install the upper mounting bolt, rear No. 1 shock absorber cushion washer and 2 bushing and rear shock absorber assembly LH to the frame.


b.
C305881

Temporarily install the lower mounting bolt, rear No. 1 shock absorber cushion washer and 2 bushing and rear shock absorber assembly LH to the spring U bolt seat sub-assembly LH.


Hide 3.STABILIZE SUSPENSION

a.

Lower the vehicle.


b.

Bounce the vehicle up and down several times to stabilize the suspension.


Hide 48540 4.TIGHTEN REAR SHOCK ABSORBER ASSEMBLY LH

a.

Tighten the 2 bolts.

Torque:
64 N*m (653 kgf*cm, 47 ft.*lbf)