Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM25T0E _53 Suspension _029910 REAR SUSPENSION _0138029 REAR SHOCK ABSORBER N

REAR SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48540 1.INSTALL SHOCK ABSORBER ASSEMBLY REAR LH

a.
C312366C01
1.958,0.208 2.271,0.365 0.313,0.156 10 false *a 2.792,0.208 3.104,0.365 0.313,0.156 10 false *b
*a 50 mm (1.9685 in.)
*b 30 mm (1.1811 in.)


Using a drill, make a hole in the cylinder shown in the illustration to discharge the gas inside.

CAUTION:

Be careful when drilling as shards of metal may fly about. Always use proper safety equipment.


HINT:

The gas is colorless, odorless and non poisonous.