Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.SUPPORT AXLE HOUSING ASSEMBLY
Support the rear axle housing assembly with a jack.
2.REMOVE REAR WHEEL
48540 3.DISCONNECT REAR SHOCK ABSORBER ASSEMBLY LH
Remove the lower mounting bolt, rear No. 1 shock absorber cushion washer and 2 bushing and disconnect the rear shock absorber assembly LH from the spring U bolt seat sub-assembly LH.
48046A 4.REMOVE REAR SPRING U BOLT
Remove the 4 nuts and 4 washers.
Remove the U bolt seat and 2 U bolts.
48475R 5.REMOVE REAR DISTANCE PLATE (w/ Distance Plate)
Remove the distance plate.
48220 6.REMOVE REAR SPRING ASSEMBLY LH
Remove the hanger pin lock bolt.
Remove the nut, washer and hanger pin from the front side.
Remove the 2 nuts, 2 washers, shackle plate, shackle pin and spring from the rear side.
48210Q 7.REMOVE REAR SPRING SHACKLE BUSH
Remove the 4 bushes from the spring and chassis frame.
48306 8.REMOVE REAR SPRING BUMPER SUB-ASSEMBLY
Remove the 2 bolts and bumper.