1.REMOVE REAR WHEEL
2.SUPPORT AXLE HOUSING ASSEMBLY
Support the rear axle housing assembly with a jack.
48826B 3.DISCONNECT REAR STABILIZER BAR LINK BRACKET
Disconnect the rear stabilizer bar link bracket with the 3 bolts.
Use the same procedure described for the other side.
48812 4.REMOVE REAR STABILIZER BAR
Remove the rear stabilizer bracket with the 2 bolts.
Use the same procedure described for the other side.
Remove the rear stabilizer bar and 2 rear stabilizer bushings.
48815R 5.REMOVE REAR STABILIZER BUSHING
Remove the 2 rear stabilizer bushings from the rear stabilizer bar.
48802 6.REMOVE STABILIZER LINK SUB-ASSEMBLY
Remove the nut, 3 rear stabilizer cushion retainers, rear stabilizer bar link bracket and 2 rear stabilizer cushions from the stabilizer link sub-assembly.
Use the same procedure described for the other side.
Remove the nut, bolt and stabilizer link sub-assembly from the rear stabilizer bar.
Use the same procedure described for the other side.
Remove the 2 collars and 2 cushions from the rear stabilizer bar.