Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM25T0E _53 Suspension _029910 REAR SUSPENSION _0138031 REAR STABILIZER BAR A

REAR SUSPENSION  REAR STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48802 1.INSTALL STABILIZER LINK SUB-ASSEMBLY

a.

Install the 2 collars and 2 cushions to the rear stabilizer bar.


b.

Install the nut, bolt and stabilizer link sub-assembly to the rear stabilizer bar.

Torque:
25.5 N*m (260 kgf*cm, 19 ft.*lbf)

HINT:

Use the same procedure described for the other side.



c.

Install a new nut, 3 rear stabilizer cushion retainers, rear stabilizer bar link bracket and 2 rear stabilizer cushions to the stabilizer link sub-assembly.

Torque:
14.7 N*m (150 kgf*cm, 11 ft.*lbf)

HINT:

Use the same procedure described for the other side.



Hide 48815R 2.INSTALL REAR STABILIZER BUSHING

a.

Install the 2 rear stabilizer bushings to the rear stabilizer bar.


Hide 48812 3.INSTALL REAR STABILIZER BAR

a.
C311700C01
1.875,0.938 2.333,0.365 2.333,0.365 2.677,0.365 true 2.802,0.281 3.115,0.438 0.313,0.156 10 false *a
*a Paint Line


Install the rear stabilizer bar and 2 rear stabilizer brackets to the rear axle housing with the 4 bolts.

Torque:
29.7 N*m (303 kgf*cm, 22 ft.*lbf)

NOTICE:

Install the 2 rear stabilizer bushings to the outside of the paint line on the rear stabilizer bar.



Hide 48826B 4.CONNECT REAR STABILIZER BAR LINK BRACKET

a.

Connect the rear stabilizer bar link bracket with the 3 bolts.

Torque:
29.7 N*m (303 kgf*cm, 22 ft.*lbf)

HINT:

Use the same procedure described for the other side.