84732A 1.INSPECT REAR HEATER BLOWER SWITCH
| *a | Component without harness connected (Rear Heater Blower Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 - 4 2 - 1 |
HI | Below 1 Ω |
| 2 - 4 2 - 1 |
OFF | 10 kΩ or higher |
| 2 - 3 2 - 4 |
LO | Below 1 Ω |
| 2 - 3 2 - 4 |
OFF | 10 kΩ or higher |
If the result is not as specified, replace the rear heater blower switch.