Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
58901A 1.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
46243 2.REMOVE PARKING BRAKE LEVER COVER
Remove the parking brake lever cover from the parking brake lever assembly.
46210 3.REMOVE PARKING BRAKE LEVER ASSEMBLY
Release the parking brake lever.
Disconnect the parking brake switch connector.
| *1 | Lock Nut |
| *2 | Adjusting Nut |
Remove the lock nut and adjusting nut.
Remove the 2 bolts and parking brake lever assembly.
46410 4.REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
Pull up the parking brake lever claw.
Remove the parking brake cable.
46451C 5.REMOVE NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET
Remove the 2 bolts and No. 1 parking brake cable support bracket.
| *a | Claw |
Detach the claw of the parking brake cable from the No. 1 parking brake cable support bracket. Then disconnect the parking brake cable from the No. 1 parking brake cable support bracket.
84550 6.REMOVE PARKING BRAKE SWITCH ASSEMBLY