Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH
RM25T0E _54 Brake _029919 PARKING BRAKE _0138076 PARKING BRAKE SWITCH G

PARKING BRAKE  PARKING BRAKE SWITCH  INSPECTION  


PROCEDURE

Hide 84550 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.
C217121C20
0,0 0,0 false
V100135

On
V100136

Off


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
Switch connector terminal - Switch body On (Shaft not pressed) Below 1 Ω
Off (Shaft pressed) 10 kΩ or higher


If the result is not as specified, replace the parking brake switch assembly.